Thermocycler
Herausragende thermische Eigenschaften mit neuer VCM® Technologie





Äußerst kompakter Thermocycler zur Integration auf Pipettier-Roboter-Systemen.
⊕ On Deck Thermal Cycler-ODTC® 96
- 96 Well Plate Format
- Breite:156.5 mm, Länge 248 mm, Höhe: 124,3 mm
- integrierbar in nahezu alle Pipettier-Roboter-Systeme
- Temperaturbereich Thermal Block: +4°C bis +99°C
- Temperaturbereich Heizdeckel: Raumtemp. +5K bis 115°C
- Maximale durchschn. Heizrate: 4.4 K/s
- Maximale durchschn. Kühlrate: 2.2 K/s
- Temperatur-Genauigkeit: ± 0.3 K bei 55°C
- Temperatur-Uniformität: ± 0.2 K bei 55°C, sogar bei asymmetrischer Beladung der PCR Platte
- Frei programmierbare Temperaturprofile
- Horizontal öffnender beheizbarer Deckel,
keine Behinderung von Greifer und Pipetierkopf - Automatische Regelung der Deckelanpressung für unterschiedliche Disposables und Verschluss-Optionen
⊕ ODTC® 96 XL
- Use low & high profile plates in the same instrument
- Larger gripper access area around the mount
- Width 156.5mm, Length 285.2mm and Height 129.3mm
- Same extraordinary thermal performance as ODTC® 96
- Free programmable temperature profiles and lid temperature
- Horizontally opening heated lid, no interference with gripper and pipetting head
- Automated adjustment of lid pressure for different disposables and sealing options
⊕ ODTC® 384 & 384 XL
- 384 well plate format
- ODTC®384: Width 156.5 mm, Length 248 mm
- ODTC®384 XL: Width 156.5 mm, Length 285.2 mm
- Height 124 mm for integration on all major LH platforms
- Same extraordinary thermal performance as ODTC® 96
- Maximum average heating rate: 5.0K/sec
- Temperature range thermal block: +4°C to +99°C
- Temperature range heated lid: +30°C to +115°C
- Free programmable temperature profiles and lid temperature
- Horizontally opening heated lid, no interference with gripper and pipetting head
- Automated adjustment of lid pressure for different disposables and sealing options
Dedicated Verification Tool for the On Deck Thermal Cycler - ODTC®
Be sure that your On Deck Thermal Cycler is performing as it should.
⊕ODTC® Verification Tool - OVT
- All in one performace verification
- Reliability due to perfect fit
- Step by step guidance through system setup
- Fully automated, short, 20 minutes test routine
- Printable PDF verification certificate in audit quality
- Routine service for instrumental and operational qualification (IQ & OQ)
- Use for regular daily verification or on demand by end-user
- Portable format
- USB connected
OVT Calibration
The ODTC® Verification Tool needs an initial temperature calibration from an accredited calibration laboratory.
Annual re-calibration is mandatory.
Verification document will only be generated with valid temperature calibration.