Kalibrierung & Rekalibrierung der INHECO Verifizierungsinstrumente IMP und OVT durch ein zertifiziertes Kalibrierungslabor.
Verification tools for for heating, cooling & shaking devices in ANSI/SLAS format and incubators up to +60°C.
INHECO offers 2 verification tools.
The INHECO Measurement Plate IMP is for verification of temperature, humidity and shaking performance in heating,cooling, shaking devices using ANSI / SLAS plates. No matter whether the device is from INHECO or from a different supplier.
The OVT is a dedicated verification tool for the ODTC® product from INHECO.
The IMP can be ordered with calibration certificates from accredited calibration laboratories. These laboratories are authorized by national accreditation bodies such as NIST or DAkkS. We recommend annual re-calibration.
The ODTC® Verification Tool - OVT needs an initial temperature calibration from an accredited acalibration laboratory.
This laboratory is authorized by national accreditation bodies such as NIST or DAkkS.
Annual re-calibration is mandatory.
INHECO Measurement Plate (IMP)
Temperature calibration IMP
ODTC® Verification Tool - OVT96
ODTC® Verification Tool - OVT384
Temperature calibration OVT
INHECO Measurement Plate - IMP:
Annual re-calibration is recommended. INHECO’s partner laboratory for calibration issues the new certificate.
On Deck Thermal Cycler Verification Tool - OVT:
Annual re-calibration is mandatory. OVT generates a verification document at the end of a verification process. This verification document will only be generated with valid temperature calibration of the OVT.
The re-calibrated IMP / OVT is returned to the customer with certificate and with a Micro-SD-Card which contains the latest versions of important documents and IMP / OVT software.
In case of updates the re-installation of the IMP / OVT software is advisable.
IMP Temperature re-calibration
IMP Shaking re-calibration
OVT Temperature re-calibration