Verification Tools: OVT & IMP

Verification of lab equipment: PCR, temperature, shaking performance and humidity.

Verification of Laboratory Equipment
  • Temperature Cycling
  • Shaking
  • Heating
  • Cooling
  • Humidity verification

New: Dedicated Verification Tool for the On Deck Thermal Cycler - ODTC®
Launch at SLAS 2017!

The perfectly matching verification tool for the ODTC®. Benefit from an automated test routine with easy setup and step by step guidance.

⊕ ODTC® Verification Tool - OVT

  • All in one performace verification
  • Reliability due to perfect fit
  • Step by step guidance through system setup
  • Fully automated, short, 20 minutes test routine
  • Printable PDF verification certificate in audit quality
  • Routine service for instrumental and operational qualification (IQ & OQ)
  • Use for regular daily verification or on demand by end-user
  • Portable format
  • USB connected
  • 7902001_ODTC® & Verification Tool - OVT & ODTC® open
  • 7902000_ODTC® Verification Tool - OVT & Measuring Head
  • 7902001_ODTC® & Verification Tool - OVT & ODTC® closed
  • 7902000_ODTC® Verification Tool - OVT Datalogger
  • 7902000_ODTC® Verification Tool - OVT Measuring Head

OVT Calibration

The  ODTC® Verification Tool needs an initial temperature calibration from an accredited calibration laboratory.

Annual re-calibration is mandatory.

Verification document will only be generated with valid temperature calibration.

INHECO Measurement Plate (IMP) for laboratory equipment. Verification of heating, cooling, shaking and humidity.

⊕ Measurement Plate - IMP

  • Temperature verification 
  • also for plate readers
  • Shaking verification
  • Humidity verification
  • Records shaking pattern, RPM & amplitude
  • Measures humidity inside incubators
  • Internal data storage
  • Export of measurement data in CSV format
  • Easy handling by common gripper systems

      Technical data sheet
  • INHECO Measurement Plate - IMP for temperature, shaking curves, humidity
  • Verification Plate - IMP for temperature, shaking curves, humidity
  • 7901000 Vericfication Tool IMP

IMP Calibration

The INHECO Measurement Plate can be ordered with calibration certificates from accredited calibration laboratories.

Annual re-calibration is recommended.

Need assistance?

Contact us at:
Tel.: +49 89 899593-120

Tel.:+49 89 899593-121

⊕ System Solution:

       ODTC® & OVT

  • Dedicated Verification Tool for ODTC®
  • Easy to use software
  • Ideal for service personel and end-users
  • 2 versions: for  ODTC®96 & ODTC®384

⊕ SBS plate format

  • Wireless operation
  • For GLP / GMP
  • for verification of open units heater, cooler, shaker, incubators, readers


INHECO Measurement Plate, verification tool IMP for temperature, shaking curves, humidity